1. Atomic absorption spectrometry

2. Sampling and analysis of airborne particulate matter by glow discharge atomic emission and mass spectrometries

3. X-ray diffraction and spectrometry apparatus

4. Electronic equipment designed for automatically detecting or identifying the presence of "explosives" residues and utilising ‧trace detection‧ techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).

5. BY ATOMIC ABSORPTION SPECTROMETRY (general procedure)

6. Combustion pretreatment-isotope dilution mass spectrometry

7. Electronic equipment designed for automatically detecting or identifying the presence of ‘explosives’ residues and utilising ‘trace detection’ techniques (e.g. surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).

8. Electronic equipment designed for automatically detecting or identifying the presence of "explosives" residues and utilising 'trace detection' techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).

9. atomic absorption spectrometry (AAS) – EN ISO 6869; or

10. — Determination of magnesium by atomic absorption spectrometry

11. Cold vapour atomic absorption spectrometry for mercury

12. Glow discharge mass spectrometry method and device

13. — Atomic Absorption Spectrometry, AAS (EN ISO 6869); or

14. Modulated glow-discharge lamp for atomic absorption spectrometry

15. Specific requirements for cold vapour atomic absorption spectrometry

16. Specific requirements for hydride generation atomic absorption spectrometry

17. Atomic Absorption Spectrometry, AAS (EN ISO 6869); or

18. Backscattering Spectrometry reviews developments in Backscattering spectrometry and covers topics ranging from instrumentation and experimental techniques to beam parameters and energy loss measurements

19. Method 8.7 DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRY

20. Glow Discharge Mass Spectrometry (GD-MS) Elemental Analysis

21. Atomic Absorption Spectrometry,AAS (EN ISO 6869); or

22. DETERMINATION OF MANGANESE IN FERTILIZER EXTRACTS BY ATOMIC ABSORPTION SPECTROMETRY

23. for mercury: cold vapour phase atomic absorption spectrometry (AAS

24. —Determination of copper in fertiliser extracts by atomic absorption spectrometry

25. Volatile matrices for matrix-assisted laser desorption/ionization mass spectrometry

26. Brucine can be detected and quantified using liquid chromatography-mass spectrometry

27. DETERMINATION OF IRON IN FERTILIZER EXTRACTS BY ATOMIC ABSORPTION SPECTROMETRY

28. Determination of iron in fertiliser extracts by atomic absorption spectrometry

29. 3. for mercury: cold vapour phase atomic absorption spectrometry (AAS).

30. — Inductively Coupled Plasma – Atomic Emission Spectrometry, ICP-AES (EN 15510); or

31. High performance liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS)

32. According to Skye's satellite spectrometry, there's a vertical shaft under this fort.

33. — Atomic Absorption Spectrometry (AAS) — Commission Regulation (EC) No 152/2009; or

34. Determination of micro-nutrients in fertiliser extracts by atomic absorption spectrometry

35. EN 15510 — inductively coupled plasma optical (atomic) emission spectrometry (ICP-AES)

36. Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) - EN:15510:2007

37. Rutherford backscattering spectrometry (RBS) is an analytical technique used in materials science.

38. Results The IR spectrometry of Ophicalcitum was different before and after calcination.

39. • Can NRC perform a Glow Discharge Mass Spectrometry (GD-MS) survey element analysis?

40. The optimum determination condition of Indium by flame atomic absorption spectrometry was studied.

41. After hydrolysis their corresponding aglycones were identified and characterized by mass spectrometry.

42. Method 9.8 - DETERMINATION OF IRON IN FERTILIZER EXTRACTS BY ATOMIC ABSORPTION SPECTROMETRY

43. Cold-vapor atomic absorption spectrometry for mercury, hydride generation techniques, and interfaces like the interface between electrothermal vaporization and inductively coupled plasma mass spectrometry all risk significant analyte loss before measurement.

44. FOR QUANTITY DETERMINATION BY ABSORPTION SPECTROMETRY, CAREFULLY ADJUST THE APPARATUS TO THE OPTIMUM WAVELENGTH .

45. For quantity determination by absorption spectrometry, carefully adjust the apparatus to the optimum wavelength.

46. — Determination of micro-nutrients in fertiliser extracts by atomic absorption spectrometry (general procedure)

47. The invention relates to a new method for sequencing biopolymers by mass spectrometry.

48. inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

49. Atomic Absorption Spectrometry, AAS (Commission Regulation (EC) No 152/2009, Annex IV-C); or

50. Determination of magnesium by atomic absorption spectrometry after appropriate dilution of the extract.

51. Atomic Absorption Spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C); or

52. This paper studied ultraviolet spectrometry method for the detection of adulterated sesame oil.

53. Backscattering spectrometry of thin films is also considered, and examples of Backscattering analysis are given

54. In the case of determination by atomic absorption spectrometry, such removal may not be necessary.

55. After wet digestion, the mercury content was determined by cold-flameless AAS (atomic absorption spectrometry).

56. Carbon is used in electrothermal atomic absorption spectrometry for tubes, platforms and electrical contacts.

57. The sorbent is heated and vaporized mercury is measured by cold vapour atomic absorption spectrometry.

58. The design of scientific and measuring apparatus and instruments, x-ray diffraction and spectrometry apparatus

59. Testing for formaldehyde is by blood and/or urine by gas chromatography-mass spectrometry.

60. Because of the outstanding sensitivity of field desorption mass spectrometry for alkali cations and the high specificity of mass spectrometry, it was possible to determine lithium from microlitre samples by using the method of stable isotope dilution.

61. Zirconium is extracted from the product under acidic conditions and determined by flame atomic absorption spectrometry.

62. Applications of ground gamma spectrometry in geological mapping in shallow overburden areas is a new attempt.

63. Rutherford Backscattering Spectrometry (RBS) is a widely used method for the surface layer analysis of solids

64. The methods for studying the mechanism of electrothermal atomic absorption spectrometry are critically reviewed and cited.

65. Rutherford Backscattering Spectrometry (RBS) is an ion scattering technique used for compositional thin film analysis

66. Adipocere samples obtained from grave exhumations were analysed using gas chromatography-mass spectrometry (GC-MS)

67. This is performed mainly by X-ray fluorescence analysis, potentiometric titrations, alpha- and mass spectrometry.

68. The glow discharge optical spectrometry (GDOS) produces depth profiles in a simple and economical way.

69. To detect Cu in fishes viscera and river's bed mud by flame atomic absorption spectrometry.

70. Bremsstrahlung radiation (Background) Bremsstrahlung means, literally, braking radiation and is an important phenomenon for ED-XRF spectrometry

71. After suitable treatment and dilution of the extracts, the iron content is determined by atomic absorption spectrometry.

72. After suitable treatment and dilution of the extracts, the zinc level is determined by atomic absorption spectrometry

73. The examples are taken from the index sections “atomic absorption spectrometry” (method), “phenols” (substance) and “soil” (material).

74. Method for evaluating analyte-related signals from an ims chromatogram captured by means of ion mobility spectrometry

75. Designing Photonic Building Blocks for: optical comms, biochemical sensing, spectrometry, etc Alcyon Photonics designs very high-performance

76. In particular on-line coupling of atomic absorption spectrometry and potentiometry with the computer is dealt with.

77. The laser ablation analysis method can be used for all freezable sample materials used in mass spectrometry.

78. After suitable treatment and dilution of the extracts, the zinc level is determined by atomic absorption spectrometry.

79. After suitable treatment and dilution of the extracts, the cobalt content is determined by atomic absorption spectrometry.

80. After suitable treatment and dilution of the extract, the iron content is determined by atomic absorption spectrometry.